Hidden beneath old carpeting, laminate, and years of damage in many homes lie hardwoods waiting to be renewed with wood floor refinishing in Oroville, California. In fact, with N-Hance, the character and unique beauty of original hardwood floors can be restored for a head-turning look that belongs on the cover of a design magazine. 

It’s true that hardwood restoration is possible with the right wood floor refinishing method, but many mistakes can be made along the way. That’s where N-Hance comes in with these professionals tips for the hardwood floors in your Oroville home. 

#1 – Not using sandpaper that’s coarse enough.

You may be more on the conservative side when it comes to which grit sandpaper you choose. Remember that while finer paper may be ideal for floors that have already been sanded extensively, the majority of hardwood floors require a coarser sandpaper than you might expect. 

Too fine of a grit can cause clogs in your machine and will need to be replaced more often. A good rule of thumb is to stick with a 16-24 grit sandpaper to remove dirt, stains, and varnish. This will help you get the job done more effectively and save you time and money in the long run. 

#2 – Failing to sand hardwood floors thoroughly. 

Keep in mind that wood floor refinishing is a labor intensive job. If you don’t see the results you’re looking for right away, keep at it. 

If your floorboards aren’t completely flat, you may notice the drum of the sanding machine skip over patches of the floor after just one pass. However, the remaining varnish can be removed with a little elbow grease. Continue sanding until the finish is gone and you’re down to the bare wood. 

#3 – Sanding floors in a direction that isn’t diagonal.

Sanding wood floors in a diagonal direction can make the process faster and more even, plus help you get to hard to reach areas. So remember, stick to a diagonal pattern when it comes to wood floor refinishing.  

#4 – Spending too much time on the edges.

You might not know this, but it’s actually ok to sand hard to reach edges less than the rest of your hardwood floors. 

For the main surface area of your hardwood floors, work your way down in coarseness until you get to 120 grit sandpaper. But for the edges, stop at about 80 grit to save yourself some time. 

#5 – Not changing the sandpaper frequently. 

Changing the sandpaper more often can make the wood floor refinishing process go much faster. While your initial reaction may be to save on sandpaper sheets and disks, you’ll see it’s well worth it to get the job done quicker and more effectively. 

Wood Floor Refinishing In Oroville, California 

Wood floor refinishing is a big project to take on, which is why N-Hance is here to help. We pride ourselves in saving you time and money while delivering the highest quality results in your Oroville home. 

Make sure the job is done right with N-Hance of Redding & Chico! We look forward to serving you in Oroville, California.

Schedule a FREE virtual estimate today to get started with your wood floor refinishing project in Oroville, California!