N-HANCE WOOD REFINISHING OF SEATTLE

Your Kitchen Painted The Right Way

Long-lasting cabinet painting company in Mukilteo, WA

N-Hance Wood Refinishing of Seattle happily serves the Mukilteo, WA painting kitchen cabinets. If you are googling “cabinet painters near me” look no farther than N-Hance Wood Refinishing of Seattle. Refresh your home by updating and modernizing your kitchen cabinets. For a fraction of the cost of competitors in the Mukilteo, Wa area, you can have your dream kitchen.

If you have been through or seen a kitchen remodel before, you may remember how long it was and how dust and fumes lingered in your home. Thankfully that is not the only option for kitchen cabinet painting in Mukilteo, WA. N-Hance Wood Refinishing uses the Revolutionary Wood Refinishing Process which is efficient, dustless, clean, and fast! Your kitchen will be painted and beautiful in just days! N-Hance Wood Refinishing of Seattle if the perfect option for no-stress no-mess kitchen cabinet painting in Mukilteo, WA.

You heard that right! With the N-Hance Wood Refinishing of Seattle’s Lightspeed® Nano process, your kitchen cabinets will be cured immediately. Get right back into your life with a process that is much faster than other cabinet painters in Mukilteo, WA. For revitalized kitchen cabinets, the choice is easy–N-Hance Wood Refinishing of Seattle!

Request More Info

N-Hance Cabinet Refinishing VS. Cabinet Painting

N-Hance Cabinet Refinishing

√ SUPERIOR PRODUCTS

Proprietary, state-of-the-art products designed to work on cabinets.
Cleaning solution developed to remove oil surface contaminants such as oils, grease, waxes, and dirt.
Proprietary sealer designed to neutralize acidic conditions that can cause discoloring over time.
Cabinet primer is used to block tannins, stains and prevent any bleed through.
Custom color is made of an acrylic polyurethane blend resulting in strong adhesion that resists chips or peeling.

√ SUPERIOR TECHNOLOGY

Using advanced technology, N-Hance developed a proprietary clear topcoat, called Lightspeed® Nano, that is applied and then cured with ultra-violet light.
Lightspeed® Nano is designed to provide a factory-grade finish for maximum durability.
Ligtspeed® contains an anti-microbial property that reduces bacteria growth by 99% keeping your home healthier, for longer.

√ SUPERIOR PROCESS

Clean the cabinets – a non-toxic, chemical cleaning process is followed to remove oils, grease, waxes, grime and old finishes.
Prep and seal – neutralizes the PH level of the wood, which is important to ensure proper adhesion and bonding.
Primer applied – designed for cabinets to block tannins, stains and prevent bleed through.
Custom color applied – several coats applied similarly to the process used with factory-finished colored cabinets for high durability.
Lightspeed® Nano applied – the topcoat is cured using UV light for an instant finish – no waiting!

Cabinet Painting

INFERIOR PRODUCTS

Products used by painters are typically not designed for cabinets.
Leaves a waxy build-up, which can cause problems with paint adhering to the wood.
Some painters use wall primer rather than cabinet primer, such as the primer used by N-Hance which is formulated specifically for cabinets.
The most common paint used by painters is a latex paint that is designed to be used on walls, not cabinets. These types of products don’t adhere well to cabinets and do not offer the same durability that N-Hance products provide.

LACK OF TECHNOLOGY

Painters often paint cabinets with a paintbrush, which can leave brush marks and an uneven finish.
Typically, no topcoat is applied and the paint on the cabinets is left vulnerable to scratches, smudges, chips, and peeling. This also leaves your cabinets looking like they’ve been painted, rather than the factory-like finish that N-Hance provides.
Cabinets are left to air-dry, which can be a real problem in high-humidity climates or rooms, such as bathrooms. This leaves your new paint finish susceptible to dust particles, smudges, dripping and fingerprints.

INFERIOR PROCESS

The process varies from painter to painter:
- May clean the cabinets
- Rarely seals the cabinets
- If the primer is used it is likely wall primer, which doesn’t provide the same durability as N-Hance’s cabinet primer

A topcoat is usually not applied, leaving your cabinets prone to future damage.
Paint can take days to dry.

Watch this short video to see how we do it!

Factory Quality Finish

To ensure that no mistakes are made, N-Hance of Seattle follows a specific process:

– Clean the Cabinets. Before we do anything, we use a proprietary cleaning process to clean your cabinets and remove oils, grease, grime, waxes and other particles that may have accumulated, as well as loose layers of old finish. This gives us a fresh canvas to work with.
– Prep and Seal. At this point, we prepare and seal the cabinet, neutralizing the wood’s pH levels. This step is important to make sure that the primer and color bond to the wood properly.
– Apply Primer. Our primer blocks tanning and stains on the wood from bleeding through and marring the surface after the process is complete.
– Apply Custom Color. We only provide the best. That’s why we use our own acrylic polyurethane blend, as opposed to basic latex paint. We apply several coats to your cabinet to make the finish durable against bumps, scratches, and other physical wear. This process is similar to the process used in factories when manufacturing new cabinets.
– Apply Lightspeed® Nano. N-Hance of Seattle uses a proprietary top coat that is cured using ultraviolet light. This finish dries quickly, meaning you don’t have to wait to use your cabinets again! Lightspeed® Nano also contains an antimicrobial property that decreases bacteria growth by 99%, keeping your home and family healthy.

The Cabinet Color Options Are Endless

The hardest part is deciding what color you want! N-Hance Wood Refinishing of Seattle offers countless color options for cabinet painting. You can paint your kitchen bright yellow or two-toned black and white. With so many choices, your style will fall in love! Your home in Mukilteo, WA will look so fresh and new when our kitchen cabinet painters are through! As the preferred cabinet painters in Mukilteo, WA, N-Hance of Seattle is the perfect decision!

You can obtain a dramatically different look at a fraction of the cost. Truth is–your cabinets are probably in good physical shape still. Replacing your cabinets completely is expensive and takes weeks. Choose N-Hance of Seattle to update your kitchen without breaking the bank. With hundreds of colors to choose from, we are the preferred Mukilteo, WA cabinet painters. We go beyond the normal cabinet painting options by also offering a variety of different finishing techniques, each of which has its own distinct look: Glazed, Antiqued, Shadowing, And More…

N-Hance of Seattle – Serving All of Mukilteo, WA

Contact N-Hance of Seattle today to discuss your cabinet painting or refinishing project in Mukilteo, WA or request a free, no-obligation in-home consultation!

(425) 957-7757

Request More Info

See what our customers are saying:

“N’hance renewed our 30 year old kitchen cabinets and did a beautiful job. The cabinets look as good as the day they were installed 30 years ago.We had one upper cabinet that never had an Oak panel on it, I purchased a new panel for it and the workmen were able to finish it to match the rest of the cabinets..”

Frank L., ★★★★★

“Had a fantastic experience with Mike and his crew. We had them restore our kitchen cabinets and they look wonderful.”

Marjorie M., ★★★★★

“Eddie and his team were professional, explained well and a pleasure to have in our home that day. Finished product looks great”

Trina D., ★★★★★

“The technicians “Ever” and “Rafael Osbildo” came out the past two days and stained my old oak kitchen cabinets an espresso finish. All I can say is AMAZING!!!!!!!! They were very professional, extremely detailed and the end result is beautiful! I highly recommend them for any project you need a cabinet makeover done!”

Gayle St., ★★★★★