N-Hance Cabinet Refinishing VS. Cabinet Painting

N-Hance Cabinet Refinishing

√ SUPERIOR PRODUCTS

• Proprietary, state-of-the-art products designed to work on cabinets.
• Cleaning solution developed to remove oil surface contaminants such as oils, grease, waxes, and dirt.
• Proprietary sealer designed to neutralize acidic conditions that can cause discoloring over time.
• Cabinet primer is used to block tannins, stains and prevent any bleed through.
• Custom color is made of an acrylic polyurethane blend resulting in strong adhesion that resists chips or peeling.

√ SUPERIOR TECHNOLOGY

• Using advanced technology, N-Hance developed a proprietary clear top coat, called Lightspeed®, that is applied and then cured with ultra-violet light.
• Lightspeed® is designed to provide a factory-grade finish for maximum durability.
• Ligtspeed® contains an anti-microbial property that reduces bacteria growth by 99% keeping your home healthier, for longer.

√ SUPERIOR PROCESS

• Clean the cabinets – a non-toxic, chemical cleaning process is followed to remove oils, grease, waxes, grime and old finishes.
• Prep and seal – neutralizes the PH level of the wood, which is important to ensure proper adhesion and bonding.
• Primer applied – designed for cabinets to block tannins, stains and prevent bleed through.
• Custom color applied – several coats applied similarly to the process used with factory-finished colored cabinets for high durability.
• Lightspeed® applied – the top coat is cured using UV light for an instant finish – no waiting!

Cabinet Painting

INFERIOR PRODUCTS

• Products used by painters are typically not designed for cabinets.
• Leaves a waxy build-up, which can cause problems with paint adhering to the wood.
• Some painters use wall primer rather than cabinet primer, such as the primer used by N-Hance which is formulated specifically for cabinets.
• The most common paint used by painters is a latex paint that is designed to be used on walls, not cabinets. These types of products don’t adhere well to cabinets and do not offer the same durability that N-Hance products provide.

LACK OF TECHNOLOGY

• Painters often paint cabinets with a paintbrush, which can leave brush marks and an uneven finish.
• Typically, no top coat is applied and the paint on the cabinets is left vulnerable to scratches, smudges, chips, and peeling. This also leaves your cabinets looking like they’ve been painted, rather than the factory-like finish that N-Hance provides.
• Cabinets are left to air-dry, which can be a real problem in high-humidity climates or rooms, such as bathrooms. This leaves your new paint finish susceptible to dust particles, smudges, dripping and fingerprints.

INFERIOR PROCESS

• Process varies from painter to painter:
  • May clean the cabinets
  • Rarely seals the cabinets
  • If the primer is used it is likely wall primer, which doesn’t provide the same durability as N-Hance’s cabinet primer

• A top coat is usually not applied, leaving your cabinets prone to future damage.
• Paint can take days to dry.