N-HANCE OF DELAWARE & PHILADELPHIA – SERVING CHERRY HILL, NJ

We Paint Kitchen Cabinets The Right Way

If you are looking into kitchen cabinet painting in the Cherry Hill area, then N-Hance of Delaware is an option for you. We offer one of the most affordable –and usually the quickest– way to bring life back into dreary looking cabinets. Our Revolutionary Wood Refinishing is an innovative, affordable cabinet refinishing service that renews your wood cabinets without the messy cleanup and inconvenience of dust, fumes, and an extended period of time being away from your kitchen.

We also offer a painting method that covers the wood grain of your cabinets, which unlike traditional cabinet painting, has a difficulty doing. We give you an on-trend and completely customized experience, fitted to what you have in mind. Our Lightspeed® process cures the finish immediately, which means the job will take a fraction of the time compared to the work of competitors. There’s no longer any reason to wait to renew the cabinets in your home!

cabinet painting Cherry Hill

N-Hance Cabinet Refinishing VS. Cabinet Painting

N-Hance Cabinet Refinishing

√ SUPERIOR PRODUCTS

  • Proprietary, state-of-the-art products designed to work on cabinets.
  • Cleaning solution developed to remove oil surface contaminants such as oils, grease, waxes, and dirt.
  • Proprietary sealer designed to neutralize acidic conditions that can cause discoloring over time.
  • Cabinet primer is used to block tannins, stains and prevent any bleed through.
  • Custom color is made of an acrylic polyurethane blend resulting in strong adhesion that resists chips or peeling.

√ SUPERIOR TECHNOLOGY

  • Using advanced technology, N-Hance developed a proprietary clear top coat, called Lightspeed®, that is applied and then cured with ultra-violet light.
  • Lightspeed® is designed to provide a factory-grade finish for maximum durability.
  • Ligtspeed® contains an anti-microbial property that reduces bacteria growth by 99% keeping your home healthier, for longer.

√ SUPERIOR PROCESS

  • Clean the cabinets – a non-toxic, chemical cleaning process is followed to remove oils, grease, waxes, grime and old finishes.
  • Prep and seal – neutralizes the PH level of the wood, which is important to ensure proper adhesion and bonding.
  • Primer applied – designed for cabinets to block tannins, stains and prevent bleed through.
  • Custom color applied – several coats applied similarly to the process used with factory-finished colored cabinets for high durability.
  • Lightspeed® applied – the top coat is cured using UV light for an instant finish – no waiting!

Cabinet Painting

INFERIOR PRODUCTS

  • Products used by painters are typically not designed for cabinets.
  • Leaves a waxy build-up, which can cause problems with paint adhering to the wood.
  • Some painters use wall primer rather than cabinet primer, such as the primer used by N-Hance which is formulated specifically for cabinets.
  • The most common paint used by painters is a latex paint that is designed to be used on walls, not cabinets. These types of products don’t adhere well to cabinets and do not offer the same durability that N-Hance products provide.

LACK OF TECHNOLOGY

  • Painters often paint cabinets with a paintbrush, which can leave brush marks and an uneven finish.
  • Typically, no top coat is applied and the paint on the cabinets is left vulnerable to scratches, smudges, chips, and peeling. This also leaves your cabinets looking like they’ve been painted, rather than the factory-like finish that N-Hance provides.
  • Cabinets are left to air-dry, which can be a real problem in high-humidity climates or rooms, such as bathrooms. This leaves your new paint finish susceptible to dust particles, smudges, dripping and fingerprints.

INFERIOR PROCESS

  • Process varies from painter to painter:
    • May clean the cabinets
    • Rarely seals the cabinets
    • If the primer is used it is likely wall primer, which doesn’t provide the same durability as N-Hance’s cabinet primer
  • A top coat is usually not applied, leaving your cabinets prone to future damage.
  • Paint can take days to dry.

Watch this short video to see how we do it!


painting kitchen cabinets cherry hill
Factory Quality Finish

To ensure that no mistakes are made, N-Hance of  Delaware follows a specific process:

– Clean the Cabinets. Before we do anything, we use a proprietary cleaning process to clean your cabinets and remove oils, grease, grime, waxes and other particles that may have accumulated, as well as loose layers of old finish. This gives us a fresh canvas to work with.
– Prep and Seal. At this point, we prepare and seal the cabinet, neutralizing the wood’s pH levels. This step is important to make sure that the primer and color bond to the wood properly.
– Apply Primer. Our primer blocks tanning and stains on the wood from bleeding through and marring the surface after the process is complete.
– Apply Custom Color. We only provide the best. That’s why we use our own acrylic polyurethane blend, as opposed to basic latex paint. We apply several coats to your cabinet to make the finish durable against bumps, scratches, and other physical wear. This process is similar to the process used in factories when manufacturing new cabinets.
– Apply Lightspeed®. N-Hance uses a proprietary top coat that is cured using ultraviolet light. This finish dries quickly, meaning you don’t have to wait to use your cabinets again! Lightspeed® also contains an antimicrobial property that decreases bacteria growth by 99%, keeping your home and family healthy.

Cabinet Color Options

In all likelihood, your cabinets are still in good physical shape, so why go to the hassle and expense of replacing them? Refinishing your cabinets with N-Hance offers just as dramatic a change in the look of your cabinets without taking as much time or money. You can use your existing cabinets and give them a new look for a fraction of the time and a fraction of the cost!

N-Hance of Delaware offers a wide variety of colors to choose from so you can customize the final product to match your own style with a long-lasting, well-protected finish. We go beyond traditional cabinet painting services by also offering a variety of different finishing techniques, each of which presents its own distinct look: Glazed, Antiqued, Shadowing, And More…

N-Hance of Delaware – Serving Cherry Hill

Contact us today to discuss your cabinet refinishing project or request a free, no-obligation in-home consultation!

(866) 944-9663

Request More Info

See what our customers are saying:

” have nothing but good things to say about N-Hance of Delaware. They are courteous and do amazing work. I will definitely be recommending you to anyone I know looking for cabinet refinishing!”

Steve B., ★★★★★

“Color change on my cabinets looks awesome! My experience with all employees was excellent. I would highly recommend N-Hance!”

Kris F., ★★★★★

“These guys did a great job! Professional and on time. Our cabinets look great – I would recommend!”

Allyson J., ★★★★★

“So happy with the value from N-Hance, saved enough money refinishing our cabinets to pay for countertops and appliances. Highly Recommended!”

Mike M., ★★★★★

“N-Hance has an amazing process that is years ahead of its competitors in quality and technology. Gorgeous is what comes to mind when I think of the finished product.”

Nathaniel C., ★★★★★

“We love our new kitchen. The new color makes it look like a full remodel.”

Karl S., ★★★★★

Read More Testimonials

Quality & Durability You Dream Of. Price & Convenience You Desire.

(866) 944-9663

Back to Top