N-HANCE OF REDDING & CHICO– SERVING MT. SHASTA, CA
Update Your Kitchen Cabinets The Right Way
Looking for a cabinet painting service in Mt. Shasta, CA? You’ve come to the right place! After time even the most beautiful cabinets can start to look and feel outdated. There are many options to choose from here in Mt. Shasta, CA, but you can only trust N-Hance of Redding & Chico for the best results at the best price.
You might be torn between hiring a cabinet painting company, a cabinet refacing company, or even choose to undergo a full cabinet replacement?
That being said, if your cabinets are still in good shape, but you’re ready to switch up the way they look, N-Hance is the best option for you.
Unlike traditional painting, our painting method covers the wood grain of your cabinets. We’ll give you an on-trend and completely customized experience, fitted to what you have in mind. Our Lightspeed® process cures the finish immediately, which means the job will take a fraction of the time compared to the work of competitors. There’s no longer any reason to wait to renew the cabinets in your home! There’s a better option. Refinishing your kitchen cabinets is the way to go.
Save Time and Money with N-Hance Cabinet Painting
Consider cabinet painting as your first choice for any kitchen renovation plan in Mt. Shasta, CA. It’s the most affordable option, and it’s a lot easier than many homeowners realize. Instead of removing and replacing your cabinets, refacing your cabinets– look into having them professionally painted or refinished.
Cabinet refinishing is the most convenient and affordable option in Mt. Shasta, CA and it doesn’t sacrifice quality. The complete process takes place in your home and doesn’t require the removal of your cabinets. Refinishing can be completed within just a few days and is much less expensive than cabinet replacement or cabinet refacing.
N-Hance Cabinet Refinishing VS. Cabinet Painting in Mt. Shasta
N-Hance Cabinet Refinishing
√ SUPERIOR PRODUCTS
Proprietary, state-of-the-art products designed to work on cabinets.
Cleaning solution developed to remove oil surface contaminants such as oils, grease, waxes, and dirt.
Proprietary sealer designed to neutralize acidic conditions that can cause discoloring over time.
Cabinet primer is used to block tannins, stains and prevent any bleed through.
Custom color is made of an acrylic polyurethane blend resulting in strong adhesion that resists chips or peeling.
√ SUPERIOR TECHNOLOGY
Using advanced technology, N-Hance developed a proprietary clear top coat, called Lightspeed®, that is applied and then cured with ultra-violet light.
Lightspeed® is designed to provide a factory-grade finish for maximum durability.
Ligtspeed® contains an anti-microbial property that reduces bacteria growth by 99% keeping your home healthier, for longer.
√ SUPERIOR PROCESS
Clean the cabinets – a non-toxic, chemical cleaning process is followed to remove oils, grease, waxes, grime and old finishes.
Prep and seal – neutralizes the PH level of the wood, which is important to ensure proper adhesion and bonding.
Primer applied – designed for cabinets to block tannins, stains and prevent bleed through.
Custom color applied – several coats applied similarly to the process used with factory-finished colored cabinets for high durability.
Lightspeed® applied – the top coat is cured using UV light for an instant finish – no waiting!
Products used by painters are typically not designed for cabinets.
Leaves a waxy build-up, which can cause problems with paint adhering to the wood.
Some painters use wall primer rather than cabinet primer, such as the primer used by N-Hance which is formulated specifically for cabinets.
The most common paint used by painters is a latex paint that is designed to be used on walls, not cabinets. These types of products don’t adhere well to cabinets and do not offer the same durability that N-Hance products provide.
LACK OF TECHNOLOGY
Painters often paint cabinets with a paintbrush, which can leave brush marks and an uneven finish.
Typically, no top coat is applied and the paint on the cabinets is left vulnerable to scratches, smudges, chips, and peeling. This also leaves your cabinets looking like they’ve been painted, rather than the factory-like finish that N-Hance provides.
Cabinets are left to air-dry, which can be a real problem in high-humidity climates or rooms, such as bathrooms. This leaves your new paint finish susceptible to dust particles, smudges, dripping and fingerprints.
Process varies from painter to painter:
May clean the cabinets
Rarely seals the cabinets
If the primer is used it is likely wall primer, which doesn’t provide the same durability as N-Hance’s cabinet primer
A top coat is usually not applied, leaving your cabinets prone to future damage.
Paint can take days to dry.
Watch this short video to see how we do it!
Factory Quality Finish
To ensure that no mistakes are made, N-Hance of Redding, Chico and Sacramento follows a specific process:
– Clean the Cabinets. Before we do anything, we use a proprietary cleaning process to clean your cabinets and remove oils, grease, grime, waxes and other particles that may have accumulated, as well as loose layers of old finish. This gives us a fresh canvas to work with. – Prep and Seal. At this point, we prepare and seal the cabinet, neutralizing the wood’s pH levels. This step is important to make sure that the primer and color bond to the wood properly. – Apply Primer. Our primer blocks tanning and stains on the wood from bleeding through and marring the surface after the process is complete. – Apply Custom Color. We only provide the best. That’s why we use our own acrylic polyurethane blend, as opposed to basic latex paint. We apply several coats to your cabinet to make the finish durable against bumps, scratches, and other physical wear. This process is similar to the process used in factories when manufacturing new cabinets. – Apply Lightspeed®. N-Hance uses a proprietary top coat that is cured using ultraviolet light. This finish dries quickly, meaning you don’t have to wait to use your cabinets again! Lightspeed® also contains an antimicrobial property that decreases bacteria growth by 99%, keeping your home and family healthy.
N-Hance of Redding & Chico– Serving Mt. Shasta, CA and the surrounding area
Contact us today to discuss your cabinet refinishing project or request a free, no-obligation in-home consultation!
“Everything went well with the color change to our bathroom cabinets. They gave us a prompt estimate, performed the job in a timely manner and was very professional. We used them previously to stain our kitchen cabinets.They do a great job and their prices are very competitive.”
Kathlyn G., ★★★★★
“I had an amazing experience with N-Hance from start to finish. It’s a family-owned business, and working with them all was super easy and fun. Very professional, meticulous, polite and we couldn’t be happier with the results. Highly recommended!!!!”
T. Benedetto, ★★★★★
“I loved the way my kitchen looked after Nhance was done. They carefully covered appliances and walls. They carefully cleaned up each day after they were done for the day. I am very happy with the color, it was exactly what I wanted and matched what I asked for.”
Fidel I., ★★★★★
“The cabinets came out beautifully, the color is really nice in the space we have, it actually brightens up the whole room. They were professional and took the time to prep everything beforehand. I would recommend the company.”
Dianne D., ★★★★★
“Nhance does a touch up on my hardwood floors a few times a year, it involves a deep scrubbing, and touching up the finish. Very affordable and makes my floors look like new agaIn. Thanks NHance!”
Karol J., ★★★★★
“We found the team and their job to be professional, clean, and thorough. All were on time and on schedule. We are thrilled with the outcome! Thanks! Recommended!”