STEP 1: PREP AND DETAIL
We mask and tape the floor, clean thoroughly, and patch and fill cracks
STEP 2: CLEAN AND BUFF
We remove dust and debris, and buff the surface using our patented cleaning solutions
STEP 3: SEAL THE FLOOR
We burnish the floor to remove grain raise, then apply our seal coat to the floor, and color-match any discolored areas.
STEP 4: APPLY FINISH
We apply the liquid polyurethane-based finish to the entire area
STEP 5: LIGHTSPEED CURE
We run the Lightspeed U.V. machine over the finish, which fully cures as we go.
STEP 6: INSPECTION
We inspect the final job with you to ensure your complete satisfaction