Name: N-Hance Wood Refinishing of Jacksonville
Address: 74 6th Street S. Jacksonville Beach, FL 32250, Jacksonville Beach, FL, US
Telephone: (904) 220-9978
Price range: $$

N-HANCE OF JACKSONVILLE

N-Hance Compared To Cabinet Painting in Jacksonville

At N-Hance of Jacksonville, we offer one of the most affordable and quickest ways to bring life back into dreary-looking cabinets. Our Revolutionary Wood Refinishing service in Jacksonville is an innovative and affordable way to renew your wood cabinets without the inconvenience of dust, fumes, and an extended period of time without your kitchen.

Our process is different than what traditional painters in Jacksonville do and the products we use are not something your local painter can buy in a store. All of N-Hance’s finishes are developed and manufactured by N-Hance. They are also exclusively created for refinishing wood cabinetry and are all proudly made in the USA!

Our proprietary Lightspeed® Nano clear coat is UV cured, creating the strongest, most durable finish available. It is something other traditional painters cannot offer and is part of what makes N-Hance the number one cabinet refinishing company in Jacksonville!

If you’re looking for cabinet painting services in Jacksonville, N-Hance is just what you need!

Request More Info

N-Hance Cabinet Refinishing VS. Cabinet Painting

N-Hance Cabinet Refinishing

√ SUPERIOR PRODUCTS

Proprietary, state-of-the-art products designed to work on cabinets.
Cleaning solution developed to remove oil surface contaminants such as oils, grease, waxes, and dirt.
Proprietary sealer designed to neutralize acidic conditions that can cause discoloring over time.
Cabinet primer is used to block tannins, stains and prevent any bleed through.
Custom color is made of an acrylic polyurethane blend resulting in strong adhesion that resists chips or peeling.

√ SUPERIOR TECHNOLOGY

Using advanced technology, N-Hance developed a proprietary clear top coat, called Lightspeed® Nano, that is applied and then cured with ultra-violet light.
Lightspeed® Nano is designed to provide a factory-grade finish for maximum durability.

√ SUPERIOR PROCESS

Clean the cabinets – a non-toxic, chemical cleaning process is followed to remove oils, grease, waxes, grime and old finishes.
Prep and seal – neutralizes the PH level of the wood, which is important to ensure proper adhesion and bonding.
Primer applied – designed for cabinets to block tannins, stains and prevent bleed through.
Custom color applied – several coats applied similarly to the process used with factory-finished colored cabinets for high durability.
Lightspeed® Nano applied – the top coat is cured using UV light for an instant finish – no waiting!

Cabinet Painting

INFERIOR PRODUCTS

Products used by painters are typically not designed for cabinets.
Leaves a waxy build-up, which can cause problems with paint adhering to the wood.
Some painters use wall primer rather than cabinet primer, such as the primer used by N-Hance which is formulated specifically for cabinets.
The most common paint used by painters is a latex paint that is designed to be used on walls, not cabinets. These types of products don’t adhere well to cabinets and do not offer the same durability that N-Hance products provide.

LACK OF TECHNOLOGY

Painters often paint cabinets with a paintbrush, which can leave brush marks and an uneven finish.
Typically, no top coat is applied and the paint on the cabinets is left vulnerable to scratches, smudges, chips, and peeling. This also leaves your cabinets looking like they’ve been painted, rather than the factory-like finish that N-Hance provides.
Cabinets are left to air-dry, which can be a real problem in high-humidity climates or rooms, such as bathrooms. This leaves your new paint finish susceptible to dust particles, smudges, dripping and fingerprints.

INFERIOR PROCESS

Process varies from painter to painter:
- May clean the cabinets
- Rarely seals the cabinets
- If the primer is used it is likely wall primer, which doesn’t provide the same durability as N-Hance’s cabinet primer

A top coat is usually not applied, leaving your cabinets prone to future damage.
Paint can take days to dry.

Featured On TLC’s Make This Place Your Home

Watch as we update the look of Chris Reed’s kitchen, who played for the Jacksonville Jaguars, and find out more about our innovative kitchen cabinet refinishing process.

We only use products designed for wood, not for walls (like traditional cabinet painters). They offer maximum adhesion and durability and are a unique acrylic polyurethane blend that can withhold the test of time. Another benefit of our process is that it’s low VOC, and free from toxic chemicals & noxious odors. Also, your cabinets will be instantly cured to a hard finish and you can use them immediately once we’re done!

Watch these short videos to see how we do it!

Factory Quality Finish

To ensure that no mistakes are made, N-Hance of Jacksonville follows a specific process:

– Clean the Cabinets. Before we do anything, we use a proprietary cleaning process to clean your cabinets and remove oils, grease, grime, waxes and other particles that may have accumulated, as well as loose layers of old finish. This gives us a fresh canvas to work with.
– Prep and Seal. At this point, we prepare and seal the cabinet, neutralizing the wood’s pH levels. This step is important to make sure that the primer and color bond to the wood properly.
– Apply Primer. Our primer blocks tanning and stains on the wood from bleeding through and marring the surface after the process is complete.
– Apply Custom Color. We only provide the best. That’s why we use our own acrylic polyurethane blend, as opposed to basic latex paint. We apply several coats to your cabinet to make the finish durable against bumps, scratches, and other physical wear. This process is similar to the process used in factories when manufacturing new cabinets.
– Apply Lightspeed® Nano. N-Hance uses a proprietary top coat that is cured using ultraviolet light. This finish dries quickly, meaning you don’t have to wait to use your cabinets again!

N-Hance of Jacksonville – Serving Jacksonville, FL, and the surrounding areas

Contact us today to discuss your cabinet refinishing project or request a free, no-obligation in-home consultation!

(904) 220-9978

Request More Info

See what our customers are saying:

“N-Hance is truly a 5-star company! We first met with Teresa who was informative and easy to talk with. It wasn’t a hard sell and she seemed very sincere and confident about her product. Once we met Mike and David, we knew for sure we had made the right choice by hiring N-Hance. We witnessed their professionalism and experience in cabinetry and painting as they meticulously prepped and painted our kitchen cabinets. They gave us exactly what we expected and more…a brighter and whiter kitchen that looks almost brand new! These guys were incredible!! I highly recommend N-Hance to anyone wanting to refinish their cabinets and not spend crazy money to replace them. We hope you’re as fortunate as we were to have Mike and David do the work. Really amazing guys!! Thanks, N-Hance for sending us a great crew!!!!”

Karen W., ★★★★★

“The professionalism was outstanding, as was the attention to detail. My husband and I were extremely happy with the cabinets. They look factory finished and beautiful. I can’t say enough about the service from helping me decide upon a color to the final clean up, the folks at N-Hance are top notch.”

Debbie P., ★★★★★

“N-Hance Wood Refinishing of Jacksonville just completed a job on my kitchen cabinets. They are original solid Maple wood cabinets custom built for house in 1991. We are extremely pleased how they turned out. The two man crew were very professional and they completed the job in five days which is what they quoted me. The owners were very helpful and responsive to any questions I had and did everything they promised. We chose a dove white finish and added pulls and knobs which N-Hance installed for me for a small charge. The cabinets look brand new and my family and friends are very impressed with the finished product. The cost was reasonable and a fraction of what it would of cost me to replace with the same quality of cabinets. We would 100% recommend N-Hance of Jacksonville to anybody.”

Donna W., ★★★★★

“We hired NHance wood refinishing to update our kitchen cabinets. The whole experience was excellent from start to finish. Teresa was great to work with on the sales end and Clay & Art, the actual painters, were very professional. I liked how they told me exactly what was going to happen each day and when the project would be finished. They started the project on a Monday and by Friday we had a beautiful, new kitchen! I highly recommend N Hance wood refinishing. Even my dog Curly gives them two paws up!”

Terri R., ★★★★★

“From quote to completion N-Hance was 5 star. We love our “new” kitchen. We experienced zero interruption or inconvenience in our daily life even while working from home due to the virus. Teresa showed up very friendly, very helpful and right on time. Took some measurements made some great recommendations and got back to us later that evening with a very reasonable quote to take our kitchen into 2020 and beyond. Work began promptly on the day promised by what I would say are true professionals. Arrived all 3 days on time and courteous. They very neatly did their magic. Wow, what an immediate impact it made. Would we recommend N-Hance? YES!! Quality 5 star Professionalism 5 star value 5 star convenience 5 star”

John A., ★★★★★

“Our 50-year old cabinets were brought back to life and we are thrilled! The owners are knowledgeable and their employees were professional in every aspect of the job. Our project was completed in one day and I plan to contact them again to restore a built-in cabinet in our dining room We couldn’t be more pleased!”

Kathy G., ★★★★★