Hidden beneath dirty, damaged, worn flooring could be the beautiful hardwood floors you dream of—all you need is a little help with N-Hance wood floor refinishing in Dover, New Jersey.
It’s possible to restore richness and luster to dull floors when you use the right methods. Here are our professional tips for avoiding mistakes along the way so you can achieve a magazine-worthy look that will last for years to come.
#1 – Using sandpaper without coarse enough grit.
Avoid the natural tendency to be overly conservative when selecting the sandpaper for your wood floor refinishing project. For wood floors that have nearly been sanded down to the point of nails being exposed, you may want to choose a finer grit sandpaper. But in most cases, a more coarse grit than you expect is what will do the trick.
Start with a 16-24 grit sandpaper, and don’t be afraid to go up in coarseness if your floors need it. By working more effectively with the right sandpaper, you’ll be able to save precious time and money and get better final results. Also, too fine of grit can clog the sanding machine and will need to be replaced more often, which slows down the process.
#2 – Failing to sand hardwood floors thoroughly.
Keep in mind that wood floor refinishing is hard work and takes time. While you may not see the results you’re hoping for right away, keep at it.
Many floorboards aren’t completely flat, which causes the drum of the sanding machine to skip over patches of the finish. This remaining varnish can be removed if you make enough passes. It may seem like a lot of work up front, but it’s worth it to continue sanding your hardwood floors until the finish is gone and your floors are completely down to the bare wood.
#3 – Going in a direction other than diagonal when sanding floors.
When refinishing wood floors, it’s important to work in a diagonal direction. This helps speed up the process, ensures the sanding is more even, and can eliminate the frustration of being left with hard to reach spots of residual finish.
#4 – Spending too much time on the edges.
Sanding the edges of your hardwood floors might be a pain, but don’t worry—you don’t need to spend as much time on these areas as you do on the rest of your floors.
Work your way down to 120 grit sandpaper on the mains surface of your hardwood floors, then stop at about 80 grit on the edges to save some time.
#5 – Not changing the sandpaper often.
Swapping out the sandpaper more often can help speed up the process of wood floor refinishing. Don’t cut corners by saving on sandpaper sheets—it’s worth the cost to use more when you see the results this delivers for your floors.
Wood Floor Refinishing In Dover, New Jersey
It’s true that wood floor refinishing is a big task, but you don’t have to handle it all yourself. Getting the job done right requires ample time, elbow grease, and attention to detail to get the best results, and N-Hance professionals can help.
The Dover, New Jersey wood floor refinishing pro’s at N-Hance are masters at unveiling the beauty of hardwood floors. We look forward to serving you!
Schedule a FREE estimate to get started on your wood floor refinishing project in Dover, New Jersey!