Classic Floor Refinishing

N-HANCE OF NORTHERN NEW JERSEY

Classic Floor Refinishing

Serving the all of Morris and Essex County, New Jersey

Many homeowners have had their wood floors refinished or sanded or heard stories from someone who did. If your experience was like most, there was dust everywhere and you were finding it months after the job was done. You probably also had to put up with the smell of the finish. There are some stories of people literally having to move out of their home and into a hotel room. And when they got back, their cereal tasted funny from the fumes. The only solution used to be sanding down to bare wood and refinishing or replacing the wood completely. Well, now there is a new service called N-Hance Revolutionary Wood Refinishing.

N-Hance of Northern New Jersey serving all of Morris and Essex County (including Succasunna, Parsippany, Troy Hills, Mount Olive, Randolph, Roxbury, Chatham, Chester, Dover, Jefferson) renews the original shine and luster of all your wood surfaces, without the dust, mess, or odor typically associated with wood refinishing. And it can be offered at a fraction of the cost of traditional refinishing, sanding or refacing!

The ideal Classic Floor Refinishing job is for a floor that has some visible wear with light surface scratches. The finish is pretty much intact with no signs of bare wood. Separations between the boards are minimal and the entire floor requires minor touch-ups, if any. A Classic Wood Floor Refinishing is typically completed in just one day.

hardwood floor refinishing parker co

The N-Hance Difference

Any Northern New Jersey homeowner who has had their floors sanded and refinished by someone other than N-Hance will know how inconvenient traditional refinishing methods can be.

  • First, there’s the wood dust. Sanding floors creates a ton of wood dust, which gets everywhere, even if it’s properly vacuumed up. Many homeowners end up finding wood dust around their home months after having their floors refinished, which is very frustrating.
  • Second, there’s the matter of chemical fumes. Solvents that are used by other wood refinishers in Denver to strip away old layers of finish can release highly toxic fumes into the air inside your home. The new layer of finish can also produce fumes. Some homeowners have had to move their families into hotels while they waited for these odors and chemicals to dissipate.
  • Finally, there’s the wait. Traditional wood floor refinishing can take anywhere for 3 to 5 days for a typical project. During that time, your furniture has been moved, your home is in disarray, and you can’t use your wood floors. What’s more, if family members or pets are at home during the day, the work itself can make life miserable. Even after the workers are finished, it can take up to a full week for the new finish on your floors to cure before you can use them again.

With N-Hance Wood Refinishing of Northern New Jersey, you don’t need to worry about any of these

 issues. Our wood floor refinishing process requires zero sanding, which means no wood dust. It also requires no solvents, and our

finishes produce low levels of VOCs. This way, you don’t need to worry about toxic fumes or lingering odors in your home.

What’s more, we refinish floors with minimal downtime. Our Lightspeed® Nano curing system uses ultraviolet light to instantly cure your new finish, a process that would normally take days. In fact, a typical N-Hance refinishing project is completed i

n just one day! And because our process requires zero sanding, we can even restore the finish on non-sandable floors, such as cork

or bamboo. Our hardwood floor refinishing services are also affordable. We’re often able to refinish wood floors at a fraction of the cost of traditional refinishing. N-Hance of Northern New Jersey refinishing services are ideal for floors with light levels of wear and surface damage. In cases where the finish has worn away, or where the wood has suffered significant damage, we recommend our hardwood restoration services instead.

Call N-Hance Wood Refinishing of Northern New Jersey today at (973) 252-9663 to learn more about our hardwood floor refinishing services and get a FREE estimate!

  • Before-Basic Floor Renewal
    After-Basic Floor Renewal

    Before Basic Floor Renewal After

  • Before-Basic Floor Renewal
    After-Basic Floor Renewal

    Before Basic Floor Renewal After

  • Before-Basic Floor Renewal
    After-Basic Floor Renewal

    Before Basic Floor Renewal After

  • Before-Basic Floor Renewal
    After-Basic Floor Renewal

    Before Basic Floor Renewal After

  • Before-Basic Floor Renewal
    After-Basic Floor Renewal

    Before Basic Floor Renewal After

  • Before-Basic Floor Renewal
    After-Basic Floor Renewal

    Before Basic Floor Renewal After

  • Before-Basic Floor Renewal
    After-Basic Floor Renewal

    Before Basic Floor Renewal After

Lightspeed® Nano Instant-Cure Refinishing

N-Hance can transform your wood surfaces in a matter of days, not weeks using our proprietary Lightspeed technology. After the specialized color product is complete, Lightspeed technology uses UV light to instantly cure a final, durable topcoat to your cabinets or floors. Surfaces will be 100% ready for immediate use when we leave.

Learn More about N-Hance Lightspeed® Nano Instant-Cure Refinishing

What our customers are saying

Back to Top