Wood Floor Refinishing Services

N-Hance® wood floor refinishing services will renew the original shine and luster of wood floors, without any dust, mess, or odor. Instead of the hassle and health concerns of traditional refinishing, we offer a fast, family-friendly, affordable way to return wood floors to like-new condition.

In the past, refinishing wood floors was a disruptive and sometimes dangerous process. Between wood dust and chemical fumes, refinishing was inconvenient at best and a health hazard at worst.

Thanks to our revolutionary Lightspeed® technology, you can avoid these concerns with N-Hance. We’ll not only restore your floors to their original beauty, but we’ll do so without any of the dust or lingering chemical odors of traditional refinishing methods. Even better, we’ll complete your project in a fraction of the time!

Benefits of N-Hance Wood Floor Refinishing

Any homeowner who’s had their floors sanded and refinished will know how inconvenient traditional refinishing methods can be.

First, there’s the wood dust. Sanding floors creates a ton of this stuff, and even if it’s properly vacuumed up, it can easily get in nooks and crannies. Many homeowners end up finding wood dust months after having their floors refinished.

Second, there’s the matter of chemical fumes. Solvents that are used to strip away old layers of finish can release highly toxic fumes into the air inside your home. Then there’s the fumes from the new layer of finish. Some homeowners have had to move their families into hotels while they waited for these odors and chemicals to dissipate.

Finally, there’s the wait. Traditional wood floor refinishing can take anywhere for 3 to 5 days for a typical project. During that time, your home’s in disarray. What’s more, if family members or pets are at home during the day, the work itself can make life miserable. Even after the workers are finished, it can take up to a full week for the new finish on your floors to cure.

With N-Hance, you don’t need to worry about any of these issues. Our wood floor refinishing process requires zero sanding, which means no wood dust. It also requires no solvents, and our finishes produce low levels of VOCs. This way, you don’t need to worry about toxic fumes or lingering odors in your home.

What’s more, we refinish floors with minimal downtime. Our Lightspeed® curing system uses ultraviolet light to instantly cure your new finish, a process that would normally take days. In fact, a typical N-Hance refinishing project is completed in just one day! And because our process requires zero sanding, we can even restore the finish on non-sandable floors, such as cork or bamboo.

To top it all off, our wood floor refinishing services are highly affordable. We’re often able to refinish wood floors at a fraction of the cost of traditional refinishing.

N-Hance refinishing services are ideal for floors with light levels of wear and surface damage. In cases where the finish has worn away, or where the wood has suffered significant damage, we recommend our hardwood restoration services.

Call N-Hance today at (855) 642-6230 to learn more about our wood floor refinishing services and get a FREE estimate!

  • Before-Basic Floor Renewal
    After-Basic Floor Renewal
    Before Basic Floor Renewal After
  • Before-Basic Floor Renewal
    After-Basic Floor Renewal
    Before Basic Floor Renewal After
  • Before-Basic Floor Renewal
    After-Basic Floor Renewal
    Before Basic Floor Renewal After
  • Before-Basic Floor Renewal
    After-Basic Floor Renewal
    Before Basic Floor Renewal After
  • Before-Basic Floor Renewal
    After-Basic Floor Renewal
    Before Basic Floor Renewal After
  • Before-Basic Floor Renewal
    After-Basic Floor Renewal
    Before Basic Floor Renewal After
  • Before-Basic Floor Renewal
    After-Basic Floor Renewal
    Before Basic Floor Renewal After

Proud Member of the NWFA

Schedule your
FREE online estimate today!

Search For Local N-Hance

Lightspeed® Instant-Cure Hardwood Floor Refinishing

Until now, refinishing hardwood floors meant having a crew in your home for 3-4 days, lots of dust and odor, followed by another 3-4 days of “dry” and “cure” time before you can even move furniture on to your floors and get back to real life. Lightspeed from N-Hance changes all that.

More Information on Lightspeed

N-Hance FAQs

Your N-Hance technician will:

  • Prep and Detail the job site by masking and draping the job site to protect your property.
  • Sweep and vacuum to remove dust from surrounding area. We even remove and clean any heat vents to ensure area is dust free.
  • Patch and fill cracks and gaps. (Not required for all applications.)
  • Hand clean the tight areas.
  • Deep clean the floor surface. Hand Clean cabinet surfaces.
  • Remove contaminants created by the N-Hance deep cleaning process.
  • Fan dry
  • Burnish before we apply the N-Hance proprietary finish.

The longevity of your wood surface finish is dependent on several factors including floor traffic, pets, and your practice of maintenance. As far as protection from wear, you can expect many years of protection and durability. Keep in mind that surface scratches are part of normal wear on your floor and cabinet finish. These can start becoming noticeable in as little as two years. If surface scratches are a concern, we suggest our N-Hance Clean and Recoat process. Remember, the better you protect your wood surfaces from damage, the longer your finish will stay beautiful.

Yes, we frequently renew floors that have been covered with wall to wall carpet. Keep in mind that all floors are not candidates for the N-Hance process. Ask your N-Hance technician for additional information.

The N-Hance proprietary process can repair and camouflage defects in your wood surfaces. The only way to totally remove imperfections is to sand the surface of the wood. This is not dust free, odor free nor convenient.

Usually your N-Hance technician is in and out of your home or office usually in a day. In most cases you will have use of your floor within a few hours. Ask your N-Hance representative for details.

No, N-Hance specializes in renewing the shine, shield and luster on all wood surfaces. A laminate floor is simply a photograph glued to a substrate with a plasticized coating. They cannot be renewed with the N-Hance process.

We love Pre-Finished or Factory Finished floors. Our process is ideal for this type of flooring.

Yes, it is important that we understand the scope of work as well as determine what your expectations are. During the estimate, we also provide advice and information on proper wood care. Since your wood floors and cabinets are one of the largest expenses in your home it is important that you understand what the N-Hance process can do. Locate the N-Hance Franchisee in your area to schedule an In-Home Estimate.

Your N-Hance technician will talk to you about proper care and maintenance of your new N-Hance finish. Your N-Hance technician will review cleaning instructions, use of furniture pads, pet instructions and traffic on your new N-Hance finish.

In most cases. Many people do not understand that the pads of dog’s feet are like sandpaper. Every time your dog goes from a dead stop to a full run he/she is sanding the surface of your floor with their paws. The N-Hance finish is self leveling and will fill in surface scratches that are created by household pets. Pets must remain off of your new N-Hance finish for a specific amount of time. Ask your N-Hance technician for additional information.

Go to the Franchise Locator on this web site and enter your zip code. It’s that easy.

Back to Top