Non-Sandable Floor Refinishing

Need help refinishing non-sandable floors? Then it’s time to call the experts at N-Hance®. Our non-sandable floor refinishing services are perfect for refinishing floors that can’t be sanded, such as bamboo, cork, or hand-scraped hardwood.

With traditional refinishing services, floors need to be sanded extensively. But with N-Hance, you can skip sanding entirely. This makes N-Hance the ideal choice for refinishing non-sandable wood floors. We can even refinish older hardwood floors that have been sanded down to tongue and groove by previous refinishers.

This service not only makes non-sandable floor refinishing a breeze. It also eliminates hassle and health concerns of airborne wood dust. And thanks to our Lightspeed® instant-cure system, we can refinish non-sandable floors in just 1-2 days — significantly less time than traditional refinishing methods!

Our Non-Sandable Floor Refinishing Services

Before N-Hance, it was nearly impossible to refinish wood floors without sanding them first. This left homeowners with few options for refinishing certain types of wood floors. If your home contained specialty wood flooring, you had few options for restoring the original finish.

Now, thanks to N-Hance, it’s easy to refinish wood floors that can’t be sanded. Our non-sandable floor refinishing service is an ideal fit for the following types of flooring:

  • Bamboo floors
  • Cork floors
  • Engineered floors
  • Hand-scraped floors
  • Distressed hardwood floors
  • Floors that have been sanded down to tongue and groove

Zero Sanding = Zero Wood Dust

At N-Hance, our non-sandable floor refinishing process uses a liquid abrasion technique to remove the old layer a finish, a job that’s usually performed by drum sanders. This makes N-Hance a less noisy, messy, and disruptive choice for refinishing. Getting rid of drum sanders also eliminates airborne wood dust, considered one of the biggest drawbacks of traditional refinishing.

Ask anyone who’s hired a traditional refinisher, and they’ll tell you how much of a pain wood dust can be. It’s hard to contain. It’s annoying to clean. And worst of all, it’s linked with increased risk of acute and chronic respiratory illnesses.

With N-Hance non-sandable refinishing services, you don’t need to worry about the hassle or health risks of wood dust. We also use low-VOC, water-based finishes and sealants. This way, you don’t need to worry about lingering fumes or chemical odors. That makes N-Hance the perfect refinishing service for families.

Call (855) 642-6230 to get a FREE estimate on non-sandable floor refinishing from your local N-Hance!

Proud Member of the NWFA

Schedule your
FREE online estimate today!

Search For Local N-Hance

Lightspeed® Instant-Cure Hardwood Floor Refinishing

Until now, refinishing hardwood floors meant having a crew in your home for 3-4 days, lots of dust and odor, followed by another 3-4 days of “dry” and “cure” time before you can even move furniture on to your floors and get back to real life. Lightspeed from N-Hance changes all that.

More Information on Lightspeed

Read More Reviews

N-Hance FAQs

Your N-Hance technician will:

  • Prep and Detail the job site by masking and draping the job site to protect your property.
  • Sweep and vacuum to remove dust from surrounding area. We even remove and clean any heat vents to ensure area is dust free.
  • Patch and fill cracks and gaps. (Not required for all applications.)
  • Hand clean the tight areas.
  • Deep clean the floor surface. Hand Clean cabinet surfaces.
  • Remove contaminants created by the N-Hance deep cleaning process.
  • Fan dry
  • Burnish before we apply the N-Hance proprietary finish.

The longevity of your wood surface finish is dependent on several factors including floor traffic, pets, and your practice of maintenance. As far as protection from wear, you can expect many years of protection and durability. Keep in mind that surface scratches are part of normal wear on your floor and cabinet finish. These can start becoming noticeable in as little as two years. If surface scratches are a concern, we suggest our N-Hance Clean and Recoat process. Remember, the better you protect your wood surfaces from damage, the longer your finish will stay beautiful.

Yes, we frequently renew floors that have been covered with wall to wall carpet. Keep in mind that all floors are not candidates for the N-Hance process. Ask your N-Hance technician for additional information.

The N-Hance proprietary process can repair and camouflage defects in your wood surfaces. The only way to totally remove imperfections is to sand the surface of the wood. This is not dust free, odor free nor convenient.

Usually your N-Hance technician is in and out of your home or office usually in a day. In most cases you will have use of your floor within a few hours. Ask your N-Hance representative for details.

No, N-Hance specializes in renewing the shine, shield and luster on all wood surfaces. A laminate floor is simply a photograph glued to a substrate with a plasticized coating. They cannot be renewed with the N-Hance process.

We love Pre-Finished or Factory Finished floors. Our process is ideal for this type of flooring.

Yes, it is important that we understand the scope of work as well as determine what your expectations are. During the estimate, we also provide advice and information on proper wood care. Since your wood floors and cabinets are one of the largest expenses in your home it is important that you understand what the N-Hance process can do. Locate the N-Hance Franchisee in your area to schedule an In-Home Estimate.

Your N-Hance technician will talk to you about proper care and maintenance of your new N-Hance finish. Your N-Hance technician will review cleaning instructions, use of furniture pads, pet instructions and traffic on your new N-Hance finish.

In most cases. Many people do not understand that the pads of dog’s feet are like sandpaper. Every time your dog goes from a dead stop to a full run he/she is sanding the surface of your floor with their paws. The N-Hance finish is self leveling and will fill in surface scratches that are created by household pets. Pets must remain off of your new N-Hance finish for a specific amount of time. Ask your N-Hance technician for additional information.

Go to the Franchise Locator on this web site and enter your zip code. It’s that easy.

Back to Top