Hardwood Refinishing & Restoration

Refinish Hardwood Floors to Like-New Condition

Homeowners choose N-Hance for our innovative hardwood refinishing process. Our process takes less than a day for most floors and requires zero sanding. This makes it a great alternative to traditional refinishing. But because our process does not involve sanding, many homeowners assume that it’s only appropriate for lightly worn floors.

In reality, our refinishing process works on all kinds of hardwood flooring — even on age-worn and badly damaged floors.

Deep scratches? Discolored hardwood? Separated floorboards? Not a problem. When you choose N-Hance hardwood refinishing services, our technicians will carefully restore these damaged areas. We will then refinish your floors using our state-of-the-art Lightspeed® system.

When we’re done, your floors will be restored to their original color and luster. And after seeing the results, you might even forget that your floors were ever damaged in the first place.

Cabinet Refinishing Services


Hardwood Refinishing for Worn & Damaged Floors

Over time, hardwood floors can take a beating. Foot traffic wears away the original finish. Sunlight causes the original color to fade. Deep scratches and gouges accrue from pets and furniture. By the time you hire a hardwood refinishing company, your floors look ready to call it a day.

Faced with this kind of damage, you might think that sanding your floors is the only solution. But thanks to N-Hance, you can easily restore your floors without sanding them first.

Instead of sanding floors with a drum sander, our process uses a liquid abrasion treatment to prepare your floors for refinishing. If deep scratches, stains, or gaps remain after this treatment, our technician will screen and fill your floor. We take great care to eliminate any signs of damage at this stage, giving your floors a like-new appearance.

After prepping your floors, our technician applies a family-friendly, water-based finish. We then cure the finish with our Lightspeed® system. Lightspeed® uses UV light to instantly cure your floors, so you don’t need to wait for the finish to cure on its own.

By choosing N-Hance hardwood refinishing services, you can restore damaged floors without the wood dust, chemical fumes, or lingering odors of traditional refinishing. What’s more, your floors will be restored in a fraction of the time. Even in cases where floors are badly damaged, the N-Hance process takes only 1 to 2 days!

Request a FREE hardwood refinishing estimate by contacting your local N-Hance at (855) 642-6230!

Lightspeed® Instant-Cure Refinishing

N-Hance can transform your wood surfaces in a matter of days, not weeks using our proprietary Lightspeed technology. After the specialized color product is complete, Lightspeed technology uses UV light to instantly cure a final, durable topcoat to your cabinets or floors. Surfaces will be 100% ready for immediate use when we leave.

Learn More

What our customers are saying

N-Hance FAQs

Your N-Hance technician will:

  • Prep and Detail the job site by masking and draping the job site to protect your property.
  • Sweep and vacuum to remove dust from surrounding area. We even remove and clean any heat vents to ensure area is dust free.
  • Patch and fill cracks and gaps. (Not required for all applications.)
  • Hand clean the tight areas.
  • Deep clean the floor surface. Hand Clean cabinet surfaces.
  • Remove contaminants created by the N-Hance deep cleaning process.
  • Fan dry
  • Burnish before we apply the N-Hance proprietary finish.

The longevity of your wood surface finish is dependent on several factors including floor traffic, pets, and your practice of maintenance. As far as protection from wear, you can expect many years of protection and durability. Keep in mind that surface scratches are part of normal wear on your floor and cabinet finish. These can start becoming noticeable in as little as two years. If surface scratches are a concern, we suggest our N-Hance Clean and Recoat process. Remember, the better you protect your wood surfaces from damage, the longer your finish will stay beautiful.

Yes, we frequently renew floors that have been covered with wall to wall carpet. Keep in mind that all floors are not candidates for the N-Hance process. Ask your N-Hance technician for additional information.

The N-Hance proprietary process can repair and camouflage defects in your wood surfaces. The only way to totally remove imperfections is to sand the surface of the wood. This is not dust free, odor free nor convenient.

Usually your N-Hance technician is in and out of your home or office usually in a day. In most cases you will have use of your floor within a few hours. Ask your N-Hance representative for details.

No, N-Hance specializes in renewing the shine, shield and luster on all wood surfaces. A laminate floor is simply a photograph glued to a substrate with a plasticized coating. They cannot be renewed with the N-Hance process.

We love Pre-Finished or Factory Finished floors. Our process is ideal for this type of flooring.

Yes, it is important that we understand the scope of work as well as determine what your expectations are. During the estimate, we also provide advice and information on proper wood care. Since your wood floors and cabinets are one of the largest expenses in your home it is important that you understand what the N-Hance process can do. Locate the N-Hance Franchisee in your area to schedule an In-Home Estimate.

Your N-Hance technician will talk to you about proper care and maintenance of your new N-Hance finish. Your N-Hance technician will review cleaning instructions, use of furniture pads, pet instructions and traffic on your new N-Hance finish.

In most cases. Many people do not understand that the pads of dog’s feet are like sandpaper. Every time your dog goes from a dead stop to a full run he/she is sanding the surface of your floor with their paws. The N-Hance finish is self leveling and will fill in surface scratches that are created by household pets. Pets must remain off of your new N-Hance finish for a specific amount of time. Ask your N-Hance technician for additional information.

Go to the Franchise Locator on this web site and enter your zip code. It’s that easy.

Back to Top